• V90 Weld End Connectors

    "V" Connector can be installed in a variety of positions:

    • The standard position is with the V and 90 degree elbow hanging down.
    • Horizontal and vertical mounting yields the same allowance for motion provided the 90 degree elbow is supported properly to avoid sagging or torquing.
    • "V" Connectors larger than 1-1/2" diameter must be supported if installed in any other position than the standard position. Supporting cable or rod should be attached to an eyelet located at the bottom of the 90-degree elbow. Flexible cable or pipe hanger rods can also be used.

  • V90 Plate Flange Connectors

    "V" Connector can be installed in a variety of positions:

    • The standard position is with the V and 90 degree elbow hanging down.
    • Horizontal and vertical mounting yields the same allowance for motion provided the 90 degree elbow is supported properly to avoid sagging or torquing.
    • "V" Connectors larger than 1-1/2" diameter must be supported if installed in any other position than the standard position. Supporting cable or rod should be attached to an eyelet located at the bottom of the 90-degree elbow. Flexible cable or pipe hanger rods can also be used.

  • V90 Grooved End Connectors

    "V" Connector can be installed in a variety of positions:

    • The standard position is with the V and 90 degree elbow hanging down.
    • Horizontal and vertical mounting yields the same allowance for motion provided the 90 degree elbow is supported properly to avoid sagging or torquing.
    • "V" Connectors larger than 1-1/2" diameter must be supported if installed in any other position than the standard position. Supporting cable or rod should be attached to an eyelet located at the bottom of the 90-degree elbow. Flexible cable or pipe hanger rods can also be used.

  • V90 Bronze/Copper Sweat Connectors

    "V" Connector can be installed in a variety of positions:

    • The standard position is with the V and 90 degree elbow hanging down.
    • Horizontal and vertical mounting yields the same allowance for motion provided the 90 degree elbow is supported properly to avoid sagging or torquing.
    • "V" Connectors larger than 1-1/2" diameter must be supported if installed in any other position than the standard position. Supporting cable or rod should be attached to an eyelet located at the bottom of the 90-degree elbow. Flexible cable or pipe hanger rods can also be used.

  • V90 Male National Pipe Thread (NPT) Connectors

    "V" Connector can be installed in a variety of positions:

    • The standard position is with the V and 90 degree elbow hanging down.
    • Horizontal and vertical mounting yields the same allowance for motion provided the 90 degree elbow is supported properly to avoid sagging or torquing.
    • "V" Connectors larger than 1-1/2" diameter must be supported if installed in any other position than the standard position. Supporting cable or rod should be attached to an eyelet located at the bottom of the 90-degree elbow. Flexible cable or pipe hanger rods can also be used.